Bienvenue sur Vittascience

Nous sommes ravis de vous accueillir 😊, Souhaitez-vous recevoir la newsletter mensuelle de Vittascience pour rester informé(e) des nouveautés, événements et contenus pédagogiques ?

loader

Datastreamer

Reading values from the Micro:bit is cool. But what if you can export the readings to Excel automatically by adding a “Datastreamer” ? And share this output with friends? Like the friends in etwinning.net In this tutorial, we will use a CO2 sensor (SGP30), but it could work with any sensor!

School project(PWS) by Tony Oelrich, Lieke Montauban van Swijndregt and teacher Eric Redegeld
Fonsvitae.nl



Put the Micro: bit with the led to the front into the GPIO board.
The sensor can be connected in two ways:
- standard with the present SDA / SCL / GND / VCC port
- or with the pins P20 (SDA), P19 (SCL), 3,3V and GND from the GPIO board (in Red)



Transfer this code to your board with the "Download .hex" button:

Follow these instructions to setup the datastreamer:
https://support.microsoft.com/en-us/office/enable-the-data-streamer-add-in-70052b28-3b00-41e7-8ab6-8a9f142dffeb
You have a great tool to share data

For this project, I decided to create a 3D-printed box, this is not required but it adds a nice touch to the project:

Лицензия

Licence Creative Commons

Этот ресурс доступен по Лицензии Creative Commons Attribution - С сохранением условий 2.0 Франция